张士伟;

• 1:九江学院机械与材料工程学院

摘要(Abstract)：

探究消声器进出口轴向角度影响消声器消声性能时,多针对单腔消声器,鉴于此,针对某汽车抗性消声器,研究多腔汽车消声器进出口轴向角度对消声性能的影响规律。采用声学有限元法,借助于VirtualLab声学仿真软件,计算消声器进气管伸进长度、第二腔室支撑板间距等结构参数改变时的消声性能。固定消声器结构参数,研究不同进出口轴向角度下消声器的消声性能,结果表明,当进出口轴向角度为60°时,多腔消声器的消声性能良好,与原消声器相比,改进后的消声器具有良好的消声性能。

关键词(KeyWords)： 消声器;传递损失;消声性能;有限元仿真

Abstract:

Keywords:

基金项目(Foundation): 江西省教育厅科技项目（GJJ170973）

作者(Author): 张士伟;

Email:

DOI: 10.19356/j.cnki.1001-3997.2021.03.054

参考文献(References)：

• [1]宫建国，马宇山，崔巍升.汽车消声器声学特性的声传递矩阵分析[J].振动工程学报，2010,23(6):636-641.(Gong Jian-guo,Ma Yu-shan,Cui Wei-sheng.Numerical analysis on acoustic characteristics of automotive exhaust muffler by transfer matrix method[J].Journal of Vibration Engineering,2010,23(6):636-641）
• [2]李林凌，黄其柏，连小氓.汽车消声器设计方法与评价指标分析[J].农业机械学报，2007,38(5):32-36.(Li Lin-ling,Huang Qi-bai,Lian Xiao-min.Analysis of evaluation indexes and design method of automotive muffler[J].Transactions of The Chinese Society of Agricultural Machinery,2007,38(5):32-36.）
• [3]郭荣，朱伟伟.多腔穿孔型宽频消声器声学特性的理论计算与优化[J].汽车工程，2014,36(10):1200-1204.(Guo Rong,Zhu Wei-wei.Theoretical calculation and optimization of the acoustic characteristics of a multi-chamber perforated broad-band muffler[J].Automotive Engineering,2014,36(10):1200-1204.）
• [4]杨志杰，张杰，姚新改.柴油发电机排气消声器的声学性能研究[J].机械设计与制造，2018(3):64-67.(Yang Zhi-jie,Zhang Jie,Yao Xin-gai.Study on acoustic performance of exhaust muffler for diesel generator[J].Machinery Design&Manufacture,2018(3):64-67.）
• [5]陈琪，兰凤崇，陈吉清.汽车排气消声器声学性能改进研究[J].机械设计与制造，2018(4):172-175.(Chen Qi,Lan Feng-chong,Chen Ji-qing.Study on acoustic performance improvement of automotive muffler[J].Machinery Design&Manufacture,2018(4):172-175.）
• [6]张士伟，陈长征，周勃.装载机消声器的消声性能的仿真计算与分析[J].噪声与振动控制，2015,35(2):201-204.(Zhang Shi-wei,Chen Chang-zheng,Zhou Bo.Simulation and analysis of noise attenuation performance of the wheel loader’s muffler[J].Noise and Vibration Control,2015,35(2):201-204.）
• [7]L.J.Eriksson.Effect of inlet/outlet location on higher order modes in silencers[J].Journal of the Acoustical Society of America,1982(72):1208-1211.
• [8]Selamet A,Ji,Zhen-lin.Acoustic attenuation performance of circular expansion chamber with extended inlet/outlet[J].Journal of Sound and Vibration,1999(223):197-212.
• [9]Selamet A,Ji Zhen-lin,Radavich P.M.Acoustic attenuation performance of circular expansion chamber with offset inlet/outlet:II.comparision with experimental and computational studies[J].Journal of Sound and Vibration,1998,223(4):619-641.
• [10]Wu C H,Wang C N.Attenuation for the simple expansion chamber muffler with a right angle inlet[J].Journal of mechanics,2011,27(3):287-292.
• [11]Yi Sung-II,Lee Byung-ho.Three dimensional acoustic analysis of circular expansion chambers witha side inlet and a side outlet[J].The Journal of the Acoustical Society of America,1986(79):1299-1306.
• [12]Venkatesham B,Tiwari M,Munja M L.Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green’s functions[J].Journal of Sound and Vibration,2009(323):1032-1044.
• [13]Keskar H,Venkatesham B.Transmission loss characteristics of an annular cavity with arbitrary port locations using Green’s function method[J].Acoustical Society of America,2017,142(3):1350-1361.